Søk

Trompet Bb Adams Custom A8 Selected Mod, Goldbrass 0,45mm, mat, Lakkert

Trumpet Bb Adams Custom A8 Selected Model, Gold Brass 0,45mm, mat, Lacquered
Produsent: Adams Brass
Tilgjengelighet: Bestillingsvare
Varenummer: 1TPBADA80G45M
80 955 kr
76 910 kr
decrease increase
Se liste over produktkataloger

Adams Trumpet - Experience the Sound of Quality


Adams A8 Trumpet
This is one of our most interesting designs visually and without a doubt that also translates in the performance of this instrument. This horns greatest feature of course is the heavy threaded integral mouthpipe. This is not just a visual effect. The result of the threaded receiver makes the horn extremely efficient and centered. It feels like each note has a definite wider target area. Unlike many other model trumpets that tend to have smaller note centers as one ascends this horn continues to have the same wide target on each note. The threading also allows you to switch mouthpieces if need be (we usually recommend that you do not switch too often as these threads are quite delicate). The a8 is also the only horn in our Custom Series line that features a fully ergonomic valve cluster.


Specifications
Bell: Gold Brass - 140 mm
Bore: L 12 mm
Finish: Satin Lacquered
Gauge: 0,45


If you would like to configure your own A8 trumpet to your personal preferences, Adams will fully custom built your instrument. Please see below for custom options.


 


All of our brass instruments are completely handcrafted in the Adams factory in the Netherlands.
Our trumpets are known for their superb voicing, intonation and responsive articulation. The many overtones in all registers provide them with a beautiful, vocal character. All trumpets are equipped with Adams piston valve blocks, formerly known as Bauernfeind valves.


All of our Adams brass instruments are hand made with the equal amount of time, labor, craftmanship, and care.


BUILD YOUR OWN?


Custom Materials
For all of our Custom Series instruments we use brass bodies with nickel silver tuning slides. Meanwhile we offer a choice in bell materials, all listed below with their specific characteristics.


Yellow Brass
This bell is an excellent mix of materials for all round work as this material is very versatile. The sound is clear and brilliant at all dynamic levels, with a good core and great projection. This alloy is ideal for lead trumpet, commercial playing and studio work. Also a good choice for principal trumpet players in symphony orchestras or someone who is looking for good crispness to the articulated sound.


Gold Brass
Like the yellow brass bell this is a very versatile horn - a near perfect blend of warmth and projection. The gold brass brings a depth to the sound which is very smooth, rich and dark, however it is still a lively and agile trumpet. It responds quickly and has good projection without getting as brilliant as the yellow brass bell. We find it to be suited to a host of applications: be it in the jazz soloist, the crossover artist, the classical soloist, or someone who is looking for depth to sound while still retaining projection.


Red Brass
The Red Brass bell material is an ideal choice for the soloist who is looking for the richest, warmest, thickest sound available. Higher in copper content than our other two bell choices this provides the player with the smoothest transitions from note to note. Articulations are veiled (although with a lighter Red Brass bell option it is greatly improved) and sound shape is overall a bit wider in shape.


Sterling Silver
We do offer all Custom Series Trumpet Models with a solid Sterling silver bell. Sterling silver is a very versatile material but also much more dependent on the individuals particular ability level. Therefore we recommend this bell option for the serious amateur or professional. The general characteristics are the bell is much darker and thicker when played at soft to medium volumes. When this bell is pushed the higher overtones are much more present and the result is a wonderful sound with great sparkle.



Custom Gauges
We offer our bells in a choice of gauge. In very general terms:


- The thinner the gauge of the bell results in a more energized, faster response.
- The ticker the gauge of the bell will result in more stability and density to the sound


Of course this in particular is very much specific to the overall build characterstics of the individual model of our Custom Series instruments. For example the A4 trumpet is primarily considered to be a "heavy" profile trumpet. We have found that a thinner gauge in the bell maximizes the whole tonal and articulation spectrum for this model.


Custom Finishes
Next to the bell thickness (gauge) and bell material, we offer a choice in the finish of your Adams Custom Series instrument. These options slightly influence the sound color and for some it's just a matter of taste.


Raw Brass
This is actually no finish. The raw material of the instrument is only polished.


Silver Plated
This finish will liven and energize the sound slightly.


Gold Plated
This finish will leave the sound very similar to the original raw state.


Clear Lacquer
The instrument keeps the look of the raw material.


Gold Lacquer
A gold tone is added to the clear lacquer.


Copper Lacquer
A copper tone is added to the clear lacquer.


Antique
Colored lacquer which gives the instrument a typical antique look.



Personalizing
Our Adams Custom Series offer many specific models as well as varation inside each model of instrument. Here are a few of the additional customizations we can offer.


Quartertone
We are pleased to offer this as a custom option for our clients. Please contact us or a dealer for more specific information.


Engraving
Anything from your name to a complete custom made design is possible now for your instrument. For specific pricing and information, please contact your nearest authorized dealer.


Multi-Color Inlays
We have a large stock of different materials, if you want to customize your valve buttons.



Adams Trumpet - Experience the Sound of Quality


Adams A8 Trumpet
This is one of our most interesting designs visually and without a doubt that also translates in the performance of this instrument. This horns greatest feature of course is the heavy threaded integral mouthpipe. This is not just a visual effect. The result of the threaded receiver makes the horn extremely efficient and centered. It feels like each note has a definite wider target area. Unlike many other model trumpets that tend to have smaller note centers as one ascends this horn continues to have the same wide target on each note. The threading also allows you to switch mouthpieces if need be (we usually recommend that you do not switch too often as these threads are quite delicate). The a8 is also the only horn in our Custom Series line that features a fully ergonomic valve cluster.


Specifications
Bell: Gold Brass - 140 mm
Bore: L 12 mm
Finish: Satin Lacquered
Gauge: 0,45


If you would like to configure your own A8 trumpet to your personal preferences, Adams will fully custom built your instrument. Please see below for custom options.


 


All of our brass instruments are completely handcrafted in the Adams factory in the Netherlands.
Our trumpets are known for their superb voicing, intonation and responsive articulation. The many overtones in all registers provide them with a beautiful, vocal character. All trumpets are equipped with Adams piston valve blocks, formerly known as Bauernfeind valves.


All of our Adams brass instruments are hand made with the equal amount of time, labor, craftmanship, and care.


BUILD YOUR OWN?


Custom Materials
For all of our Custom Series instruments we use brass bodies with nickel silver tuning slides. Meanwhile we offer a choice in bell materials, all listed below with their specific characteristics.


Yellow Brass
This bell is an excellent mix of materials for all round work as this material is very versatile. The sound is clear and brilliant at all dynamic levels, with a good core and great projection. This alloy is ideal for lead trumpet, commercial playing and studio work. Also a good choice for principal trumpet players in symphony orchestras or someone who is looking for good crispness to the articulated sound.


Gold Brass
Like the yellow brass bell this is a very versatile horn - a near perfect blend of warmth and projection. The gold brass brings a depth to the sound which is very smooth, rich and dark, however it is still a lively and agile trumpet. It responds quickly and has good projection without getting as brilliant as the yellow brass bell. We find it to be suited to a host of applications: be it in the jazz soloist, the crossover artist, the classical soloist, or someone who is looking for depth to sound while still retaining projection.


Red Brass
The Red Brass bell material is an ideal choice for the soloist who is looking for the richest, warmest, thickest sound available. Higher in copper content than our other two bell choices this provides the player with the smoothest transitions from note to note. Articulations are veiled (although with a lighter Red Brass bell option it is greatly improved) and sound shape is overall a bit wider in shape.


Sterling Silver
We do offer all Custom Series Trumpet Models with a solid Sterling silver bell. Sterling silver is a very versatile material but also much more dependent on the individuals particular ability level. Therefore we recommend this bell option for the serious amateur or professional. The general characteristics are the bell is much darker and thicker when played at soft to medium volumes. When this bell is pushed the higher overtones are much more present and the result is a wonderful sound with great sparkle.



Custom Gauges
We offer our bells in a choice of gauge. In very general terms:


- The thinner the gauge of the bell results in a more energized, faster response.
- The ticker the gauge of the bell will result in more stability and density to the sound


Of course this in particular is very much specific to the overall build characterstics of the individual model of our Custom Series instruments. For example the A4 trumpet is primarily considered to be a "heavy" profile trumpet. We have found that a thinner gauge in the bell maximizes the whole tonal and articulation spectrum for this model.


Custom Finishes
Next to the bell thickness (gauge) and bell material, we offer a choice in the finish of your Adams Custom Series instrument. These options slightly influence the sound color and for some it's just a matter of taste.


Raw Brass
This is actually no finish. The raw material of the instrument is only polished.


Silver Plated
This finish will liven and energize the sound slightly.


Gold Plated
This finish will leave the sound very similar to the original raw state.


Clear Lacquer
The instrument keeps the look of the raw material.


Gold Lacquer
A gold tone is added to the clear lacquer.


Copper Lacquer
A copper tone is added to the clear lacquer.


Antique
Colored lacquer which gives the instrument a typical antique look.



Personalizing
Our Adams Custom Series offer many specific models as well as varation inside each model of instrument. Here are a few of the additional customizations we can offer.


Quartertone
We are pleased to offer this as a custom option for our clients. Please contact us or a dealer for more specific information.


Engraving
Anything from your name to a complete custom made design is possible now for your instrument. For specific pricing and information, please contact your nearest authorized dealer.


Multi-Color Inlays
We have a large stock of different materials, if you want to customize your valve buttons.



Produktspesifikasjoner
Fabrikat-ForlagAdams Brass
ProduktTrompet Bb
SerieA8
FinishLakkert Messing
FargeGold
MaterialeGold brass
StemmingBb
InkludertSoft Bag
InkludertPusseduk m.m.
Produktspesifikasjoner
Fabrikat-ForlagAdams Brass
ProduktTrompet Bb
SerieA8
FinishLakkert Messing
FargeGold
MaterialeGold brass
StemmingBb
InkludertSoft Bag
InkludertPusseduk m.m.
Filters
Sort
display