Søk

Rensebørste Ventilhus Denis Wick 4918

Cleaning Brush Ventilhus Denis Wick 4918
Produsent: Denis Wick
Tilgjengelighet: På lager
Varenummer: DW4918
105 kr
decrease increase

Valve Brush


Description
This superbly made valve brush is suitable for trumpet, cornet and other smaller brass instruments. The bristles are soft and there is a long handle for ease of use. There is also a plastic tip to the brush to offer excellent scratch protection. The brush is solidly made to stop the bristles shedding.


To Clean your Trumpet Valves


You will need;-


1 x DW4918 Valve Brush
1 x DW4914 Trumpet Snake Brush
1 x DW4930 Denis Wick Advanced Formula Valve Oil
1 x old toothbrush
Take the valves out of the instrument, noting the order in which you removed them. Remove the bottom caps from the instrument, then, with warm, soapy water, simply use the brush to clean inside the valve block to remove any build-up of oil residue and debris. Washing-up liquid or a similar detergent is fine. Brush each valve casing at least fifteen times over a minimum period of thirty seconds to ensure clean and hygienic valves. Gently clean the valves (remembering to keep them in order) using the same hot, soapy water. Use a Snake Brush to clean the valve ports and an old toothbrush to scrub the surface of the valve, being careful not to scratch it.  Once clean, rinse with clean water and allow to dry on a cloth. When fully dry, apply Denis Wick Advanced Formula Valve Oil to the valves and replace them in the correct order back in the instrument. Your valves should now be free of any harmful microbes, and should move freely and easily.


Overall length 14.50cms
Brush length 8.00cms
Handle length 6.5cms



Valve Brush


Description
This superbly made valve brush is suitable for trumpet, cornet and other smaller brass instruments. The bristles are soft and there is a long handle for ease of use. There is also a plastic tip to the brush to offer excellent scratch protection. The brush is solidly made to stop the bristles shedding.


To Clean your Trumpet Valves


You will need;-


1 x DW4918 Valve Brush
1 x DW4914 Trumpet Snake Brush
1 x DW4930 Denis Wick Advanced Formula Valve Oil
1 x old toothbrush
Take the valves out of the instrument, noting the order in which you removed them. Remove the bottom caps from the instrument, then, with warm, soapy water, simply use the brush to clean inside the valve block to remove any build-up of oil residue and debris. Washing-up liquid or a similar detergent is fine. Brush each valve casing at least fifteen times over a minimum period of thirty seconds to ensure clean and hygienic valves. Gently clean the valves (remembering to keep them in order) using the same hot, soapy water. Use a Snake Brush to clean the valve ports and an old toothbrush to scrub the surface of the valve, being careful not to scratch it.  Once clean, rinse with clean water and allow to dry on a cloth. When fully dry, apply Denis Wick Advanced Formula Valve Oil to the valves and replace them in the correct order back in the instrument. Your valves should now be free of any harmful microbes, and should move freely and easily.


Overall length 14.50cms
Brush length 8.00cms
Handle length 6.5cms



Produktspesifikasjoner
Fabrikat-ForlagDenis Wick
ProduktMessinginstrument
SerieCleaning Brush
Produktspesifikasjoner
Fabrikat-ForlagDenis Wick
ProduktMessinginstrument
SerieCleaning Brush
Kunder som kjøpte denne varen kjøpte også
Varen er på lager

Rensebørste Munnstykke Messinginstrument Denis Wick 4917 Small bore

Cleaning Brush Mouthpiece Brassinstrument Denis Wick 4917 Small bore
80 kr
Varen er på lager

Vannklaffkork Yamaha Kornett/Trompet

Waterkey Cork Yamaha Cornet/Trumpet
32 kr
Varen er på lager

Ventilolje La Tromba T2 Special

Valve Oil La Tromba T2 Special
105 kr 100 kr
Varen er på lager

Rensebørste Ventilhus Denis Wick 4918L (Low Brass)

Cleaning Brush Ventilhus Denis Wick 4918L (Low Brass)
105 kr
Filters
Sort
display